Home | Contact
Deutsch  Français  Italiana  Español  English
Electronic | Cable technology | Recycling | Site Map 

 Recycling, CE conformity



CRM 2000 for recycling copper from old cables and cable waste. Depending on the diameter, the cable is inserted into the relevant hole where two rollers guide it over a blade which cuts the cable. Then the individual wires or cores can be rid of insulation on small rollers, if necessary.CRM 2000 Copper Recycling Machine
CRM 2000 for recycling copper from old cables and cable waste.
Datasheet
Video


Compact hydraulic shears Alligator CA 250 enable clean cutting of cables and soft metals (copper and aluminium) to precise lengths. The blade length of 250 mm enables easy insertion of the cut material.Alligator CA 250 Cutting Machine
Compact hydraulic shears Alligator CA 250 enable clean cutting of cables and soft metals (copper and aluminium) to precise lengths.
Datasheet
Video


G96-1 is a compact but high-performance device for granulation of cables and copper, which are used for recycling of copper and aluminium from old cables or other residues. This device is attractive mainly due to its small size and quick and easy installation. Therefore, G96-1 granulation equipment is mobile, it can be used for dismantling industrial buildings or for time-limited work at one site.From a technological point of view, this equipment is an entirely closed system operated by one single person.Cablegranulator G96-1
G96-1 is a compact but high-performance device for granulation of cables and copper, which are used for recycling of copper and aluminium from old cables or other residues.
Datasheet
Video


The Junior 25 cable peeler can process cables of 1–28 mm size. This slow-running machine is based on a simple construction design. The insulation is cut by two blades located horizontally opposite each other. Two synchronous rollers move the cables to the blades and then further along for take-off.Junior 25 Copper Recycling Machine
The Junior 25 cable peeler can process cables of 1–28 mm size.
Datasheet

MThe Maxi 100 cable peeler can process cables of 6–100 mm size. This slow-running machine is based on a simple construction design. The insulation is cut by two blades located horizontally opposite each other. Two synchronous rollers move the cables to the blades and then further along for take-off.Maxi 100 Copper Recycling Machine
MThe Maxi 100 cable peeler can process cables of 6–100 mm size.
Datasheet
Video


Say goodbye to tired hands and cable cutting tools with rachets! PowerBlade is operated very easily and can cut cables of sections up to 400 sq.mm.Cutting Tool PowerBlade 35-078
Say goodbye to tired hands and cable cutting tools with rachets! PowerBlade is operated very easily and can cut cables of sections up to 400 sq.
Datasheet
Video


Easy 120 is a compact but high-performance granulation machine used for recycling of copper from old cables or their residues. This device is attractive mainly due to its small size and quick and easy installation. Therefore, it is mobile and it can be used when dismantling industrial buildings or for time-limited work at one site. This completely self-containing equipment can be operated by one single person. It is also very suitable for the smallest cables made from cores (from computers and device, etc.)Cablegranulator Easy 120
Easy 120 is a compact but high-performance granulation machine used for recycling of copper from old cables or their residues.
Datasheet
Video


The Cable Stripper CS 3471 rapidly strips insulation from cables approx 3 – 90mm, allowing the metal within to be recycled. With upper and lower blade the insulation are cut very easy. With joystick it is very simple to do the adjustment of the blade and disc guide . Simple to set up and User-friendly.Cable Stripper CS 3471
The Cable Stripper CS 3471 rapidly strips insulation from cables approx 3 – 90mm, allowing the metal within to be recycled.
Video


Greemman scrap cutter -GMC 200- is working by hydraulic cylinder and movable, so do not care shape and condition of cable for heavy cutting. And GMC 200 is very much special for entangled scrap cable to cut.GMC 200H Scrap cutter
Greemman scrap cutter -GMC 200- is working by hydraulic cylinder and movable, so do not care shape and condition of cable for heavy cutting.
Datasheet
Video


Greemman cable stripper ST300- can strip bot hof exterior and interior covering wire in same time. ST300 is equipped with two parts together to make stripping process tob e effective: thickness selective stripping part and thickness ad-justable stripping part. The thickness selective stripping part can cut and strip the interior covering of wire by selecting the thickness of interior wiring inserted into wire with the upper pressure roller of exterior covering cutting part repeatedly operning and closing. The thickness adjustable stripping part can strip the interior wiring by adjusting the cut depth according to the thickness of interior wiring. And Greemman scrap stripper has another model fo heavy/underground cable as well.ST 300 Copper Recycling Machine
Greemman cable stripper ST300- can strip bot hof exterior and interior covering wire in same time.
Datasheet
Video


Kajman 300L - 1000 series: patent protected hydraulic alligator shears impress by their quality, reliability and simple operation. They are designed primarily for shearing solid waste (particularly metal scrap). Hydraulic alligator shears
Kajman 300L - 1000 series: patent protected hydraulic alligator shears impress by their quality, reliability and simple operation.
Datasheet
Video


benetec / Leimattenstr. 6, CH - 8907 Wettswil / Tel. +41 (0) 44 700 24 18 / Fax. +41 (0) 44 700 24 19 / info@benetec.ch