| PCB Separators
 
MAESTRO PCB Separator
With the MAESTRO 2M PCBs are inserted in the guide, collected
by the circular blade, transported and separated.
With the MAESTRO 4M, which works with motordriven and optimal
path carriers, high separation performance is also achieved. With the
MAESTRO 4M, the prescored grooves can be interrupted with any number
of cut-outs. Circuit boards with overlaying components can also be separated.
For separating, the PCB panel is placed with the pre-scored groove on
the linear blade.  By using the foot pedal, the groove moves over the
PCB with the circular blade and in so doing separates multiple panels.
 Hektor a good helper with separate milled PCBs.
The off-cut material is cut out cleanly and smoothly. Blades come
in four standard widths. Intermediate sizes are produced upon the
customer's request. Cutting is performed with compressed-air.
The off-cut material is pulled under the blade. By use of the foot
pedal, the cut-out material is punched out and the waste material
is collected inside the machine.
PC controlled PCB – depanelling Machine  EASY 4030
Technical data:
- working range (X,Y;Z): 395mm / 300mm / 100 mm
- axis speed: 150mm/s
- axis drive system: dc motors
- Measurement (D/W/H) 834,5mm x 771mm x 805mm
- high frequency spindle 60.000 rpm
- weight: appr. 150 kg
- design: table unit with protection cover
Options / accessories:
- Dust-extraction - explosion protected, approved for hazardous dusts – 1,5 kW, 3.800l/min, 250 mbar
- Machine underframe / - table
- Standard PCB-fixture according to customer-drawing/ sample specification
PCB Depanelling Machine LOW 4233
SHANK AND / OR DISC BASICMACHINE with parallel shuttle in/out
Technical specifications LOW 4233
Machine
- W x DT x H 1000 x 1.350 x 1.550 mm
- Working height 930 – 1.050 mm
- Weight ca. 850 kg
- Current 400 / 230 V / 50/60 Hz / 32 A
- Compressed air 0,6 mPa (6bar), oilfree
- Air need appr. 70 l/min
- Ambient temperature + 18 °C - + 30°C
- Color RAL 9002 / customer specific
Work space
- Standard panelsize 420 x 330 mm
- or customer specific
- Mounting height top side max. 15 mm
- Bottom side max 40 mm
- or customer specification
Options
- Manual loading with shuttle-system
- Single- or Twin-Spindle (2 x shank / disc)
- quick-tool easy demountable jig, PCB vacuum-fixation
- Broken bit control
- Automated tool change – 4 stations
- Vision-System for automated object recognition/Teach-in
- Good-/bad recognition
- Traceability-Interface
- PCB pass / rejects processing
- remote service
- DIN 66025 program-converter
- Interface– Smema or customer specific
PCB fixation 
PCB resting with tooling holes in centering-pins and on supporting pins in unpopulated areas, if required in combination with vacuum pins. Stabilization from top with spindle pressure foot brush or cover
Dust extraction
External dust-explosion protected vacuum unit, with intelligent Tool valve, suction-monitoring Optionally connection to central dust-extraction system.
|
