| Solder Pots
 SP-201
and SP-401 Solder Pots
General-purpose solder pots with precise temperature control of
± 6°C through the use of a thermal timer switch with automatic
correction for voltage fluctuations.
Features:
- Safety heat shield protects the solder pot
- 3-position switch with infinitely variable temperature control
- Pot - Ø: 64mm
- Pot depth: 38mm
- Removable dross tray for easy cleaning
- Grounded cable, 170cm long
- Capacity: 1kg.
- Height adjustable leveling feet
- Shipping weight: 5kg
Technical Data
Model |
Voltage |
Wattage |
Temperature Range |
SP-201 |
240VAC |
350W |
525°C |
SP-401 |
240VAC |
500W |
595°C |
 SP-150T and SP-750T Solder Pots
Dependable temperature control, which limits voltage peaks to 2
mV. These solder pots exceed the new MIL-Specification DOD-STD-2000
and Navy WS-6536E requirements in terms of their wattage. Temperature
control with a maximum deviation of ± 2.75°C from the
pre-selected setting in the range between room temperature up to
482°C/525°C.
Technical Features:
- New solid state control
- Temperature preset switch
- LCD display
 Internal circuit compensates for power fluctuations and a power
supply circuit breaker- All metal construction for ESD protection
- Safety shield
- Removable dross tray for easy cleaning
- Grounded cable
Additional Features SP-150-T:
- Crucible - Ø: 64mm
- Crucible depth: 38mm
- Height -adjustable leveling feet
- Capacity 1 kg.
- Shipping weight: 5.4 kg
 Additional Features SP-750-T:
- Crucible 102x152xDepth102mm
- Height -adjustable leveling feet
- Output jack for an external temperature recorder or data logger
- Safety warm-up crucible
- Capacity: 14 kg
- Shipping weight: 20 kg
Technical Data
Model |
Voltage |
Wattage |
Temperatur Range |
SP-150-T |
240VAC |
350W |
525°C |
SP-750-T |
240VAC |
1000W |
482°C |
 Small
soldering baths from Solbraze are primarily used for the tinning
of wires, cords, copper wire, component connectors, etc.
Features:
- Models with diameters of 25 - 150mm available
- Temperature accuracy is from +/-15°C to +-2°C depending
on the model
- Temperature ranges are 330°C - 500°C depending on the model
Rotadip
Series Soldering Baths are used where regular dip soldering
and tinning work is performed over a longer period of time. The
rotating scraper pushes the dross from the surface of the solder
pot into the dross collection tray. Thus, a clean, virgin surface
of solder is available at all times.
 Features:
- Continuously variable temperature control, up to 450°C,
optionally up to 550°C
- Stable base
- Insulated heat shield for the safety of the operator
- Dross collection tray
- Connection for external foot-operated switch for rotation cut-off
- Automatic solder feed unit, including level sensor
- Solder pot diameters of up to 304mm depending on the model
|
